Natural Odor Anti-alkali Primer

Features :
Fresh smell. Healthy and environmentally friendly.
Good sealing capacity.
Good permeability. The base coating can be strengthened to improve the adhesion of the floating coating.
Resist water seepage of walls. Reduce and even water absorption of the base coating.
Efficient alkali resistance. It can prevent latex paints from damages caused by alkaline substances of base materials.
It can save finishing paints and improve the fullness of film.

Introduction

Adopting the brand new clean technology of Germany to reduce residual odors in primer, Chenyang natural odor anti-alkali primer can effectively penetrate into the interior wall, providing excellent adhesion and super sealing. Using with finishing paint products, it can ensure the coating is more beautiful and excellent, creating a comfortable, healthy and beautiful home environment. It can be widely used in places with all kinds of high environmental protection requirements.

Instructions:

Application methods : roll spreading, brushing or spraying. Recommend to use wool brush, short hair roller and high-pressure airless spraying gun.

Dilution : Stir evenly before use. In order to achieve the best painting effect, no more than 20% clean water can be added for dilution when roll spreading and brushing (appropriately change the amount according to the hand feel of paints). If airless spraying gun is used, no more than 10% clean water can be added for dilution.

Base materials treatment : Remove dusts, greases, mold algae and other adhesion matters on the painted surface. Keep the surface clean, dry and smooth. The surface moisture content of walls is less than 10% and the pH value is less than 10. For old walls, shovels and spades should be used to remove old films that are not strong. Dusts, powders and other impurities on the surface also should be removed. The surface should be polished to be smooth and thoroughly dry.

Application environment : In summer, drying too fast should be prevented. In winter, baking should be prohibited. For sand and dust weather, windows should be tightly closed.

recoating time : take the 30-micron dry film under 25-30 ℃ asreference: surface drying for 30 minutes; hard drying for 60 minutes; recoating interval for 2 hours.

Tool Cleaning : After halt or completion of painting, please use clean water to clean all used tools.

Theoretical paint consumption : 10-12 ㎡ / ㎏ / single time. Due to difference of actual applying surface roughness and the dilution ratio, the paint consumption varies.

Advice : It is suggested to be used together with the waterborne interior wall paint products under the Natural Odor product series.