Introduction

Adopting upgraded environmental protection formula and Chenyang`s latest odor removing technology, Chenyang Bei Tu Le waterborne interior wall paint boasts natural and fresh smell and excellent environmental protection performance. Taking the brand-new formula design of strong hiding power, this product has larger painted area. As the healthy and environmental friendly waterborne paint with high quality, it is easy to apply and mend. This product is suitable for interior wall coating, such as concrete, asbestos boards, plaster boards, cement pressure plates and cement mortars.

Gloss: matt

Color: white。

Direction 

Application methods | roll spreading, brushing or spraying. Recommend to use high-pressure airless spraying gun.

Dilution |use clean water to dilute. For brushing and roll spreading, the maximum amount of water added is 20%. For airless spraying, the maximum amount of water added is 5% -10%. The water adding amount can be adjusted according to the applying effect and difficulty of application. To avoid affecting coating performance, don’t excel the maximum water adding amount. Stir evenly before use.

Base materials treatment | Remove dusts, greases, molds, algaes and other adhesion matters on the painted surface. Keep the surface clean, dry and smooth. The surface moisture content of walls is less than 10% and the PH value is less than 10. For old walls, shovels and spades should be used to remove old films that are not strong. Dusts, powders and other impurities on the surface also should be removed. The surface should be polished to be smooth and thoroughly dry.

Application environment | 5-35℃，humidity < 85%. In summer, drying too fast should be prevented. In winter, baking should be prohibited. For sand and dust weather, windows should be tightly closed.

recoating time | take the 30-micron dry film under 25-30 ℃ as reference : surface drying for 30 minutes; hard drying for 60 minutes; recoating interval for 2 hours.

Tool cleaning|During the interval and after finishing, please use clean water to clean tools in time.

Theoretical paint consumption | 11-13 ㎡ / ㎏ / single time(take 30um dry film as reference). Due to difference of actual applying surface roughness and the dilution ratio, the paint consumption varies.

Suggestion| Suggest to apply Chenyang special primer of waterborne interior wall paint after puttying to increase putty compactness. Moreover, it can save finishing paints and guarantee beautiful film. Advise to apply Bei Tu Le waterborne interior water paints for two times.

Warning 

Hazard note: It may cause eye irritation or skin allergy. 

Precautions: Avoid inhalation of dusts, smokes, gases, smogs, steam and spray. Wear protective equipment while applying paints. Clean hands and other contact areas after operation. Do not discharge into the environment. 

Accident response: If skin or hair is contacted, rinse with plenty of soapy water and clear water. If eyes are contacted, rinse immediately with plenty of clean water and seek for medical help. If skin irritation or rash occurs, please consult a doctor in time.

Safe storage Avoid direct sunlight. Store in well-ventilated places with the temperature from 5℃ to 35℃. Keep containers tightly sealed. Store in isolation from strong acids, alkalis, oxidants, food and animal feed.

Waste disposal 

Disposal of paint waste should comply with national and local regulations on disposal (refer to Product Safety Technical Instructions before use). 

Environmental protection items

The harmful matter content is in line with the stipulation in the National Standard GB 18582 “Indoor Decorating and Refurbishing Materials——Limit of Harmful Substances of Interior Architectural Coatings”.

Notes：The product performance and the application data listed above are obtained under standard experimental conditions. For the actual application environment is diverse and out of control, please don`t hesitate to contact Hebei Chenyang Industry and Trade Group Co.Ltd.